MAGZIPSTRIP — INTEGRATION & PILOT RELEASE CHECKLIST
Version: 2026-10-19 | inquiry@magzipstrip.com

[ ] Drawing identifies both A/B sides, contact face and feed direction.
[ ] Selected material, section, carrier and enclosure match the approved sample.
[ ] Fabric layers, compressed gap and seam allowance are specified.
[ ] Stitch path is clear of hard magnetic elements.
[ ] Fixture, foot, feed tension and handling have been reviewed on the actual line.
[ ] Cut positions and end retention/sealing are defined for this construction.
[ ] Closed and open bending behavior have been checked on the product.
[ ] Detection/inspection sequence is validated with the factory and buyer.
[ ] Opening action, retention and care requirements have a sample-specific plan.
[ ] Magnetic surroundings and intended-user considerations have been reviewed.
[ ] Paired-unit definition, winding, labels, lot traceability and packaging are agreed.
[ ] Sample and drawing revision are signed off before the production release.

Project / revision:
Open issues:
Responsible owner / target resolution:
Approval record:

This checklist supports process review. It does not replace a factory's controls
or a finished-product assessment. Do not bypass needle-detection requirements.