Keep the joining process visible
Show where the closure component ends and the bag weld begins, including the corners and terminal seals.
MZS-Hermetic™ / Weldable lip development
Weldable Magnetic Closure Strips for Pouch OEMs
Plan the magnetic lip, sealing surface and welded bag construction as one system.
OEM components · matched A/B constructions · project-specific review
Start with the construction
Weldable lip development.
A magnetic lip can bring the two sides of a pouch together. Whether that opening resists a splash, pressure or immersion depends on much more than the magnet.
Use the MZS-Hermetic development route to define the closure lip, encapsulation, compatible bag film, end seal and joining process together. The name identifies the project architecture; it does not confer an airtight seal or an IP rating.
Application shortlist
Where to begin the evaluation
- Soft outdoor pouches
- Bag organizer openings
- Welded fabric development
- Custom closure-lip projects
Design choices
Three decisions that shape the result.
Specify the actual exposure
Separate rain or splash use from immersion, water pressure and air-leak requirements.
Test the whole pouch
A component sample cannot establish the finished bag rating. Include seams, film, folds and repeated-use conditioning.
Drawing & RFQ inputs
Specify your MZS-Hermetic construction.
These are the inputs to a sample review. Material, dimensions and acceptance values are confirmed in the agreed drawing and quotation.
| Item | Specify in the brief | Why it matters |
|---|---|---|
| Bag material | Film or coated fabric, coating type and thickness | Check compatibility with the proposed joining method. |
| Lip layout | Opening width, magnetic rows, sealing face and folds | Define closure behavior across the entire opening. |
| Joining process | RF, heat or other qualified bonding route | Agree the process window and fixture on representative material. |
| End seal | Corner geometry and terminal retention | Closure ends can be as important as the straight section. |
| Validation | Exposure, duration, pressure and acceptance criteria | Do not infer immersion performance from a splash demonstration. |
From a strip to an assembly
Plan the integration before the order.
Define the use
State the stored contents and whether the bag faces rain, splash, immersion or pressure.
Build the lip section
Include the membrane, magnetic elements, folds and proposed end detail.
Develop the joint
Evaluate a joining window with the actual film or coated textile and production equipment.
Qualify the finished bag
Test before and after opening cycles, folding and the specified environmental conditioning.
Keep qualification specific. Published construction drawings explain the concept. Material declarations, sample measurements, care performance and any finished-product rating must refer to the selected assembly. Review testing and safety considerations.
Buyer questions
Questions about MZS-Hermetic™
Is the strip automatically IPX8 or suitable for 30 m depth?
No. A rating belongs to a defined finished product and its specified test conditions. No depth, IP rating or airtightness is claimed for an unspecified magnetic strip.
Can the same strip be sewn and RF welded?
These are different joining routes. A needle hole and a welded membrane behave differently. Confirm the enclosure and carrier construction for the selected process.
Can it be used in drinking-water reservoirs?
Food or drinking-water contact requires a separate material and finished-product assessment. Send the intended market and contact conditions for review; do not infer approval from the polymer name.
Is this a licensed FIDLOCK or Gooper component?
No affiliation or licence is implied. Branded systems and intellectual-property rights are separate from a custom component development request.
Compare adjacent routes
The best fit may be a different construction.
01 / MZS-CordConcealed sew-in construction
MZS-Cord™
A sleeved magnetic core for plackets, piping channels and discreet bag openings.
Explore the construction
02 / MZS-FlexTapeContinuous strip construction
MZS-FlexTape™
Continuous paired strip formats for pattern-led lengths and repeatable OEM assembly.
Explore the construction
03 / MZS-InterlockProfile-assisted retention
MZS-Interlock™
Explore shaped mating surfaces when lateral movement matters as much as closing force.
Explore the constructionR&D sample selection
Bring your fabric. We’ll start with the closure.
Share the opening length, fabric stack and intended use. Discuss a paired sample selection before committing to a production specification.
Sample contents, availability and shipping are confirmed for your project.
